Skip to Content
  1. All products
  2. Performance Fittings
  3. Push Lock Hose
  4. Performance Fittings Push Lock Hose 1/4" ID for AN -4, Black, 10 FT - PRF70657-10
  5. Push Lock Hose
Pricelist: Public Pricelist Pricelist
Pricelist: Public Pricelist Pricelist
Performance Fittings Push Lock Hose 1/4" ID for AN -4, Black, 10 FT - PRF70657-10
Brand Name: Performance Fittings
Manufacturer Part Number: 70657-10

Performance Fittings Push Lock Hose 1/4" ID for AN -4, Black, 10 FT - PRF70657-10

Performance Fittings Push Lock Hose 1/4" ID for AN -4, Black, 10 FT - PRF70657-10

1/4" ID push lock hose for -4 AN fittings, black cover, pre-cut to 10 feet.

Key Features:

  • 1/4" ID push lock hose for -4 AN fittings
  • Compatible with Racing Fuels, Methanol, and Pump Gasoline (including E85/E10 blends)
  • Black cover
  • 10 foot pre-cut length
  • Push-lock design requires no hose clamps with matching push-lock hose ends
  • Sold each
  • Comparable to Redhorse HSE-402-04-10 and Mishimoto MMHOSE-PL-04-120
$ 32.99 $ 32.99

Add to cart
Buy now
Terms and Conditions
30-day money-back guarantee
Shipping: 2-3 Business Days
Contact Us

Internal Reference: PRF70657-10

Specification

Inner Diameter
1/4 Inch
Fitting Compatibility
AN -4
Length
10 Feet
Color
Black
Outer Material
Synthetic Rubber
Core Material
Synthetic Rubber
Hose Type
Push Lock
Clamps Required
No (when used with compatible barbed fittings under standard pressures)
Fluid Compatibility
Fuel, Oil, Coolant, and Most Automotive Fluids
Abrasion Resistance
High
Flexibility
High
Maximum Operating Pressure
Check with manufacturer (typically 250-300 psi for push lock hoses)
Minimum Operating Temperature
-40 Degrees Fahrenheit
Maximum Operating Temperature
212 Degrees Fahrenheit (typical for push lock hoses)
UV Resistant
Yes

Description

The Performance Fittings Push Lock Hose (PRF70657-10) has a 1/4" inside diameter sized for -4 AN push-lock hose ends, with a black cover. Pre-cut to a 10 foot length, it's fully compatible with racing fuels, methanol, and pump gasoline including E85/E10 ethanol blends.

The push-lock design slides directly onto a barbed push-lock fitting with no clamps required, simplifying installation while providing a secure, leak-resistant connection for fuel, oil, or coolant systems.

Disclaimer

This product must be correctly matched to your application's requirements (fluid type, pressure, and fitment) before use. Improper selection, installation, or use may result in product failure, leakage, or damage, and could cause serious injury. Installation by a qualified professional is recommended. This product may contain chemicals known to the State of California to cause cancer and reproductive harm. For more information, go to www.P65Warnings.ca.gov.